Built with quality and durability, the Handler® 140 is a wire welding package with industrial performance capable of operating on standard 115/120 volts, 20 amp home circuits. The broad output range of 25 - 140 amps allows you to weld 24 gauge up to 1/4 inch steel. It is also capable of running the following wires: mild steel or stainless steel .023 -.035 in (0.6 - 0.9 mm), flux cored .030 -.035 in (0.8 - 0.9 mm), and aluminum .030 in (0.8 mm). Four output voltage settings with wire feed tracking make the unit easy to set and adjust for different materials and thicknesses. Supplied with a 1 lb (.45 kg) spool of wire and adaptable for using 4 or 8 inch (102 or 203 mm) spools.

COMES COMPLETE WITH:

Rugged constant-voltage DC welder power source
Durable built-in wire feeder
Built-in gas solenoid valve
Dual-gauge regulator and gas hose
Comfortable 10 ft H10 MIG torch
10 ft work lead with clamp
Three .030 in (0.8 mm) contact tips
1 lb spool of .030 in (0.8 mm) self-shielded flux cored welding wire
Weld set-up and information chart
Power cord with plug
Owner's Manual with parts lists, installation, operation, maintenance and MIG welding guidelines

PROCESSES MIG

(GMAW) Welding
Flux Cored (FCAW) Welding

Rated Output: 90 A, 19 VDC at 20% Duty Cycle
Max. Open Circuit Voltage: 28 V
Current Range: 25 - 140 amps
Dimensions H: 12-3/8 in (315 mm) W: 10-5/8 in (270 mm) D: 19-1/2 in (495 mm)
Wire Feed Speed Range: 40 - 700 IPM, 50 - 740 IPM at no load
Amperes Input at Rated Load: 60 Hz 115 V KVA KW 20 2.9 2.5
Net Weight: 57 lb (26 kg)

Complete Specifications

Warranty 5/3/1